|
We have many
floorplans in stock. We will provide you with a "FREE" stock
floorplan,
if, you send us an e-mail describing your ten-sided dream home.
Your description, of size and desired features, will allow us to choose a
floorplan to send to you that matches your description as closely as
possible.
If you wish to order a custom floorplan
for your new ten-sided dream home,
the cost, including five revisions, is $75.
This cost ($75) will later be deducted
from the cost of a complete 20+ page construction plan set,
if, you decide to have us draw a complete set of custom home plans.
Revisions are normally handled by e-mail.
If you live outside the USA, all correspondence will be via email.
The final revision of your custom floorplan will be printed on
11"x17" paper
and mailed to you via USPS priority mail.
There will be a postage service charge of $5.15.
If your live inside the USA and wish to order custom floorplans
push the "Buy Now" button below these words.
You will be sent to a "Secure PayPal website".
You may pay $80.15 for custom floor plans
by credit card or with PayPal account.
FYI: A complete 20+ page construction plan set will cost $1800,
or, one dollar per square foot for larger homes.
|
The dome home above and below was economically built with EconOdome kits on a DIY Mesa Base.
Want a spacious dome home for about $40,000.
How can this be done? With EconOdome kits and your labor.
This Basic 2x4 EconOdome frame kit costs $8,250.
To create two complete floor levels inside you need a riser wall kit.
The five feet high 2x4 riser wall frame kit costs $1,750.
All other materials may be purchased locally.
Optionally, you may wish to order: pre-cut insulated triangles.
The 38.5' above dome will have 2,000 sf on two floor levels.
Cost to completely enclose & weather proof about $20,000.
Cost to complete the interior about another $20,000.
A gas water heater and an aquarium pump are used to heat the floor.
Riser walls + window & door frames are put together at the factory.
The building was framed up to ten feet high in just one hour.
The rest of the boards (struts) were put up one at a time.
It started raining in the afternoon so three people
finished putting the dome framework together the next morning.
Triangle panel made of rigid insulation and DensDeck cover the dome.
Screws with large washers are used to install the triangle panels.
The seams and washers are covered with cloth saturated with resins.
More waterproofing is applied to the surface with paint rollers.
When the waterproofing is thick enough the dome home will not leak.
|
Dome Home Photos Menu
