The Basic EconOdome 2x6 frame kit.
The Basic frame kit includes 2x6 precut blocking within each triangle.
The Basic frame kit includes
pre-assembled trapezoids and pre-assembled skylight framing.
The Basic frame kit is designed to have sheetrock installed
after the dome is enclosed and waterproofed.
You may use fiberglass batt insulation or
site installed blow-in insulation that hardens after being sprayed.
The Basic frame kit is designed for those people who
wish to have the smooth sculpted look of sheetrock on the interior.
Many people choose the Basic frame kit when they want
to have as many rooms as possible upstairs. Both frame kit types include all
necessary metal connectors to assemble and secure the dome framework.

The EconOdome T-Beam frame kit includes
a 2x6 main frame with attached 2x4 interior trim.
The T-Beam frame kit is designed for those people who
wish to add a creative triangle pattern and a woodsy look to the interior
The T-Beam frame kit is also designed to eliminate up-side-down ceiling work.
The interior face of the triangular panels may be finished with
sheetrock, paneling, wood boards, acoustical material, or upholstry.
The exposed 2x4 interior trim supports triangle panels layed in place from above
just before the exterior facing triangle panels
are attached to the outside of the EconOdome framework.
The interior facing 2x4 trim of the T-Beam frame extends one inch into the
triangular openings to hold the panels in place. The interior T-Beam trim starts just above the loft floor level.
The interior side of the exterior walls on the first floor level
are sheetrocked after the dome is enclosed.

This is a photo of a 38.5 foot diameter EconOdome T-Beam frame kit.
Pre-assembled trapezoids and riser walls include framed door and window openings.
All struts at the loft level have routered and sanded 2x4 interior trim pre-attached.
Pre-assembled conventional skylight framing is shown in the foreground.
Pre-cut rectangular frames for conventional skylights are supplied
with all EconOdome frame kits at no extra cost.
You are encouraged to discuss frame kit types and options by e-mail anytime or by phone --toll free-- at 1-888-DOME-LUV.

Click Here for a "Fuller" explaination

Connecting hardware is included with all type frame kits:
High tech stainless steel screws and stainless steel metal straps.
All structural components are predrilled for connecting screws.
Our Basic and T-Beam frame kits are
manufactured from #1 kiln dried 2x6 Southern Pine lumber.
We offer pre-cut exterior panel kits of various designs to accomodate
more insulation and/or a ventilation space.
We have found that adding rigid insulation outside the sheathing helps
to inhibit moisture and mold problemes due to condensation issues.
Our standard exterior panel kits consist of 130 pre-cut triangles made with
1/2 inch thick cdx plywood and 130 pre-cut triangles made with 1/4 inch thick DensDeck
Prime Roof Guard with rigid one inch thick R-6.5 insulation board
glued to the backside of the DensDeck Prime Roof Guard by Georgia Pacific.
We supply pre-cut panels for all 130 triangular sloping surfaces.
All standard pre-cut exterior triangle panel kits are supplied with
3.5 inch long hot dip galvanized ring shank nails with
pre-loaded one inch diameter washers.
The big nails with washers ensure the triangle panels
will stay on during severe weather events.